Al, I’m sorry if you’re having a bad day. Sometimes updating the firmware will fix this problem, but if not the hardware could be damaged. Welcome brand-new chassis fans from the Cryorig Company. All content and materials on this site are provided “as is”. The flash memory can be erased and programmed in seconds with only a few keystrokes, and since the MSP flash is ultra-low power, no external power supply is required.

MSP-FET430UIF – VCP, list of drivers

I solved this problem updating Ms-pfet430uif driver. In addition I have found that the little connector Ti uses on the EZ boards is a bit sus too. All content and materials on this site are provided “as is”. The flash memory can be erased and programmed in seconds with only a few keystrokes, and since the MSP flash is ultra-low power, no external power supply is required.

The display features Well, let me see, I have read the manuals, I know the MSP and it’s quirky Kickstart msp-fet4330uif pretty well, I’ve been designing with it for fcp 12 years, and have designed and built well over a hundred working systems in that time. They will be easily distinguished from its predecessors on the number of the form 7xx. Hello all, My lab recently purchased a new laptop that came preloaded with Windows 8.

Introduction to Microcontrollers Mike Silva. Msp-fet430ukf reply to Alexandre Hagihara: This indicates that the device is receiving power. Unzip, run the unpack, then install the executable and it works.

Download drivers for MSP-FETUIF – VCP

Al, I’m sorry if you’re having a bad day. In reply to Amit Jain Kickstart is amazingly twitchy, but seems to have just 1 or 2 uninformative failure modes. I am surprised or not that this question has not been answered yet.

Hardware considerations can be ruled out by using a TI target board, available for order at www. If so were able to successfully program and debug with this tool at any time in the past?

Ports – Texas Instruments – MSP-FET430UIF – VCP Drivers Download

Alexandre Hagihara answer worked for me. This time, it appeared to only load the VCP.

Mentions Tags More Cancel. See this article for more information and a workaround. Locked Cancel Do you have another question?

msp | MSP-FETUIF driver not installing

Welcome brand-new chassis fans from the Cryorig Company. Ask a related question Ask a new question. No issue for us with the last IAR 5. The fans feature eleven blades and for the most part are designed in black and white colours.

Some mwp-fet430uif a non-working cache or part thereofother — xcores, and others — a graphics block, and a fourth — a weak memory controller.

The catchall is communications failure. Perhaps IAR has modified their driver scheme, but I haven’t mssp-fet430uif able to find mention of that in any docs.

This should rule out software considerations.

Was the tool in question ever recognized by any PC? In addition, I was unable to download any programs or debug any devices. In reply to Jim Flesher: No license, either express or implied, by estoppel or otherwise, is granted by TI. Any other third-party products, brands or trademarks listed above are the sole property of their respective owner. May 30, 8: